Home / Fiber Optic / Multi Operator Box - Shenzhen Welink Technology Co., LTD

Multi Operator Box - Shenzhen Welink Technology Co., LTD

Shenzhen Welink Technology Co,.LTD. is a high-tech enterprise founded in 2014, mainly serving fiber optic solutions for USA, UK, Canada & all over the world.

Multi Dwelling Unit box PMI-48P

Capacity: 48 Cores
Dimensions: 450mm*180mm*150mm
Material: ABS+PC
Design Style: Indoor
Adapter Type: SC/LC
Applications: The telecommunication network, metropolitan area network, optical fiber communication system.
No.of Cable Entries & Exits:3
Color: RAL 7035
Key Feature: view less
view more

Multi Operator Cassette Splitter OPS-01

Capacity: 4/8/16
Dimensions: 100mm*45mm*10mm
Material: Plastic
Design Style: Cassette Type
Adapter Type: SC/FC
Applications: FTTX Network/LAN/WAN/CATV Network
No.of Cable Entries & Exits:1*2/1*4/1*8/1*16/2*4/2*8/2*16
Color: Black
Key Feature: view less
view more

Multi operator box CTO-48P

Capacity: 48 Cores
Dimensions: 450mm*182mm*150mm
Material: Plastic
Design Style: Indoor
Adapter Type: SC simplex
Applications: FTTX Distribution
No.of Cable Entries & Exits:3
Color: RAL 7035
Key Feature: view less
view more

Multi operator Boxes designed for the interconnection of the Operator network with connections to customers in an indoor facility. The multi operator distribution box has 2 separate spaces and with independent doors for zone Operator and Client. In the operator area, it has in addition to the fixings for the fiber input cables, spaces for house optical splitters in box type, fusion trays and organizers of the fibers. Between both areas is the separator where adapters are located SC / LCdx type. Elements are available in the client area to fix the connection cables that will go out of the box to customers through of the space left by the bottom cover or superior once the one that most agree in each case. These multi operator boxes are easily stackable to increase its capacity and facilitate customer interconnectivity between Operators. 48 SC ports multi operator boxes allow connections and connections such as those needed in FTTH networks for both the interior of buildings and those used as an optical interconnection point between the optical cables of the operators' power or distribution networks and the building's distribution network (vertical installation). The multi dwelling unit box design of the new multi-operator stacking boxes allows them to be used in two independent modules to separate the operator area and the customer area, avoiding installation problems. The 32 and 48 SC port boxes are easily installed bolted directly to the wall in common areas of the building: garages, communication rooms, interior rooms, etc. All the fiber optic connection cables make it through the space on the right, removing the upper or lower covers of the boxes, which at the same time allow to easily interconnect the optical fiber of a client from one operator to another. This multi dwelling unit box, so common and necessary in any ICT installation, needs to be of a very high quality and with a very nice design designed to facilitate the quick installation of cables without penalizing its quality. It is also very necessary to make the final measurements. Uses of multi-operator stacking boxes As an operator network termination module and housing for optical splitters, they provide a space that comfortably accommodates optical splitters in BXM-type pads, fusion trays, organizers and all the necessary elements for the correct installation of optical fibers. As an optical interconnection module with the vertical network of the entire building. As a single module allowing, in the latter case, the interconnection of individual on-demand optical connections connected directly to the homes of end customers. They have 2 zones to separate the operator and customer area. The entrance of the distribution cables is done through the ports located on the side of the box. The connection cables make it through the space on the right, removing the upper or lower covers, which at the same time allows to easily connect the fiber of a client from one operator to another. In the Operator space, the box includes space to accommodate 3 optical splitters in BXM type tablets, as well as 6 fusion trays, organizers and all the necessary elements for the correct installation of the fibers.

These multi operator boxes for interiors of buildings, which have been designed for GPON and FTTH topologies, allow the connection between multiple operators and clients. The new models feature a flexible side entry that allows multiple boxes to be stacked and an oval entry that facilitates cable bleeding.
[caption id="attachment_1531" align="alignnone" width="600"]multi operator box CTO-48P multi operator box CTO-48P[/caption]
The distribution boxes have compartments separated by a distribution panel of up to 48 optical fibers and make it possible to install the cables by means of direct fusion or connectorization, by incorporating two fusion cassettes and one splitter cassette (1 × 8 or 1 × 16). These multi-operator models, measuring 155 x 330 x 105mm, also include 16 SC / APC Zr. Adapters, splice protectors, wall mounting hardware (four screws and four plugs), six flanges, and helical tape. The boxes, with hinged lid with key, are made of cream white ABS plastic (RAL 9001).

Languages / 语言

About Us

News Center

Contact Us

Languages / 语言

Connect With Us

Copyright © Welink All Rights Reserved